Park Tool - Truing Stand Parts

PARK TOOL - TRUING STAND PARTS

K-TS-2TA: Allows truing stand to be used with 12, 15, 20 and 25mm thru axle hubs. Axles must be removed to use adaptors. Adaptors mount easily to TS-2.2 or TS-2 Truing Stand.

K-238K: The 238K will upgrade TS-2 truing stand for use with callipers that accept the plastic tips. The kit includes a left and right calliper and two plastic removable tips.

K-238-2: Replacement calliper tips for TS2.2 and TS-2 upgrade kit.

K-TS-TA: The TS-TA makes it possible to adapt all Park Tool Truing Stands to work with 12mm, 15mm and 20mm thru axle wheels, as well as Cannondale® Lefty™ wheels. Works with the TS-2, TS-2.2, TS-8, TS-25, TS-15, TS-5 and TS-3.

K-TS-2EXT.2 Truing Stand Upright Extension:
Truing Stand Upright Extensions install in seconds on any TS-2 Truing Stand, allowing the stand to be used on wheels with hubs up to 200mm wide (tandem, fat and downhill bikes), as well as on wheels with a 29” mountain bike tire installed. In addition, specially sized bosses on the TS-2EXT.2 serve as adaptors so the TS-2 Truing Stand can be used with wheels using 12mm, 15mm, 20mm or 25mm thru-axle hubs with removable axles.
Note: The TS-2.2 does not require this adaptor to accommodate 29" wheels but does require it to fit hub widths from 180mm to 200mm.

Dial Indicator Gauge Set for TS-2.2 and TS-2 Truing Stands:
K-TS-2Di: A dial indicator bracket and set that measures a wheel’s lateral and radial run-out to .01mm
Mounts easily to any TS-2 or TS-2.2 Truing Stand.
Enables user to set and follow tolerances for each wheel.
Includes two dials, mounting brackets and specially designed tips.