A full workshop bleed kit for the major mineral-oil hydraulic brake systems.
The Bleedkit Workshop Pro Mineral Edition is the complete option for workshops and home mechanics servicing a mix of Shimano, SRAM Mineral, Magura MT, Formula Cura, Lewis, TRP and Tektro brakes. It includes dedicated fittings, bleed blocks and TPX syringes to cover flat-bar, road, gravel and newer SRAM mineral systems.
The two TPX syringes are easier to handle during regular brake servicing. Brake fluid is not included.
One Kit for Mineral-Oil Brake Systems
This kit has separate fittings for Shimano, Magura MT, TRP, Tektro and SRAM Mineral brakes. It also includes an Edge Large adaptor and dedicated bleed blocks for SRAM mineral brakes and Maven, rather than relying on one general fitting.
For Shimano, it covers both flat-bar brakes and hydraulic road and gravel systems including Dura-Ace, Ultegra, 105 and GRX.
Built for Regular Workshop Use
The TPX syringes, gravity-bleed clamps and 25cm hook-and-loop strap make the job easier to manage. Bleed blocks are included for Shimano flat-bar, Shimano drop-bar, SRAM mineral, SRAM Maven and Magura MT brakes, so you have the right parts ready when different bikes come through the workshop.
Brake Fluid
This kit does not include brake fluid. It is for mineral-oil brake systems only. Shop brake fluid here.
What’s Included
- Two 20ml TPX syringes
- 30ml transparent lever funnel with brass M5 thread
- 20ml Luer-slip lever funnel for Magura MT levers
- Threaded stainless steel oil stopper with hanger
- Two M5 mineral-oil assemblies
- Two M4 mineral-oil assemblies
- Edge Large adaptor for SRAM mineral hydraulic brakes
- Tube with M6 brass fitting for Magura, TRP and Tektro brakes
- Tube with stainless steel insert for Shimano bleed nipples
- Clamps for easier gravity bleeding
- Brass M5-to-M6 adapter for TRP and Tektro brakes
- Brass M5-to-M7 adapter for Shimano Dura-Ace, Ultegra, 105, GRX and Tiagra brakes
- Funnel and adapter base with spare O-ring storage
- Bleed block for Shimano flat-bar two- and four-piston brakes, also suitable for compatible TRP and Tektro brakes
- Bleed block for Shimano drop-bar hydraulic brakes
- 11mm bleed block for SRAM mineral brakes
- Bleed block for SRAM Maven brakes
- Two bleed blocks for Magura MT hydraulic brakes
- Rubberised 25cm hook-and-loop strap for securing the caliper syringe
- 7mm wrench, Torx T25/T15 combination wrench and Torx T10 wrench
- Spare O-rings
Compatibility
- All Shimano hydraulic brakes, including XTR, XT, Saint, Zee, SLX, Deore, Alivio, Acera, Alfine and Metrea
- Shimano drop-bar hydraulic brakes including Dura-Ace, Ultegra, 105, Tiagra and GRX
- All SRAM mineral-oil hydraulic brakes
- All Magura MT hydraulic brakes
- Formula Cura hydraulic brakes
- TRP and Tektro hydraulic brakes
- Lewis hydraulic brakes
- For mineral-oil systems only
Our Thoughts
This is the kit for a workshop that sees plenty of different mineral-oil brake systems. It covers the newer SRAM mineral brakes properly, while still including the Shimano road, Magura and TRP/Tektro fittings that often catch out a basic kit. If you only work on one brand, a smaller dedicated kit makes more sense. If you work on everything, this one saves a lot of time.
Not Sure Which Kit You Need?
SRAM DOT and Mineral brakes, Shimano road and flat-bar brakes, and different bleed-port fittings can all require different gear. Read our guide: Brake Bleed Kits – Which Kit Do You Need?.
Why Buy from Chain Reaction?
- Helpful advice from riders and workshop staff
- Genuine bike tools and workshop consumables
- Nationwide delivery from Christchurch