A Reinforced Alloy Handlebar Built for E-MTB Riding.

The Burgtec Ride Wide E-Bike Riser Handlebar is a strong aluminium bar developed for the extra demands of modern electric mountain bikes. It combines an 800mm width with a comfortable 9-degree backsweep, 5-degree upsweep and 35mm rise.

This version uses a 35mm centre clamp and is tested to motocross safety standards. It is a separate model from the standard Ride Wide Alloy Enduro handlebar, with a reinforced construction and an approximate weight of 333g.

800mm Width with Cut-Down Marks

The handlebar is supplied at 800mm wide, giving you plenty of leverage and room to trim it to suit your bike, body position and riding style. Suggested cut-down marks help keep both ends even when shortening the bar.

Remove only a small amount from each side at a time and test the new width before cutting further. Make sure there is still enough straight bar for your grips, brake levers, controls and lock-on collars.

Comfortable 35mm Rise

The 35mm rise creates a higher hand position than Burgtec’s lower-rise Enduro options. This can help produce a more upright riding position and may make it easier to stay centred on steep or technical terrain.

The final cockpit height also depends on your frame, stem and headset spacers, so consider the complete setup before choosing a higher-rise handlebar.

9-Degree Backsweep and 5-Degree Upsweep

The Ride Wide shape angles the grips towards the rider while raising the outer ends slightly. This creates a natural wrist position that works well for trail, enduro and e-MTB riding.

Handlebar roll affects both the effective sweep and height. Start with the alignment markings centred in the stem, then make small adjustments until your wrists and controls feel comfortable.

Check Your Stem Before Ordering

This handlebar has a 35mm centre clamp and must be fitted to a stem with a matching 35mm handlebar clamp. It will not fit a 31.8mm stem.

Key Features

• Reinforced aluminium E-Bike handlebar
• 800mm width
• 35mm rise
• 35mm centre clamp
• 9-degree backsweep
• 5-degree upsweep
• Suggested cut-down marks
• Tested to motocross safety standards
• Burgtec Black finish
• Approximately 333g
• Manufacturer part number: 4241

Who Is This Handlebar For?

The Ride Wide E-Bike bar suits e-MTB riders wanting a strong 800mm aluminium handlebar with a higher 35mm rise. It is particularly useful for riders looking to raise their hand position or replace an existing 35mm-clamp E-Bike handlebar.

Riders using a 31.8mm stem will need a different handlebar or a compatible 35mm stem.

Our Thoughts

This is the correct Ride Wide option for an E-Bike rider wanting a 35mm clamp and 35mm rise. The extra height can work well on modern e-MTBs, but it should be considered alongside the bike’s frame stack and current stem position.

We recommend checking your existing clamp diameter before ordering and taking a conservative approach if you plan to shorten the bar.

Why Buy from Chain Reaction?

• Advice on handlebar width, rise and stem compatibility
• Professional handlebar cutting and installation available
• Help setting up brake levers and controls
• Independent Christchurch bike shop
• Nationwide New Zealand delivery

Specifications

• Brand: Burgtec
• Model: Ride Wide E-Bike Riser Bar
• Material: Aluminium
• Width: 800mm
• Rise: 35mm
• Backsweep: 9 degrees
• Upsweep: 5 degrees
• Clamp diameter: 35mm
• Colour: Burgtec Black
• Weight: Approximately 333g
• Cut-down marks: Yes
• Manufacturer part number: 4241
• Intended use: E-MTB, trail, enduro and gravity riding