Push on, pump up and release with one hand.
The Granite Design Quickie is a leverless pump head for Presta, Schrader and Clik valves. Push it onto the valve to lock it in place, then press the release button to remove it when you are finished.
Available with two hose fittings, the Quickie can replace the head on a compatible floor pump, cordless inflator or compressor hose. Check your hose before selecting a version.
Choose the Right Hose Fitting
- Schrader Thread: Screws onto a compatible Schrader-threaded hose fitting. It can be removed and moved between compatible pumps.
- Compression Nut: Fits bare rubber hose with an 8–11 mm outside diameter. The included nut and ferrule secure the head to the hose; the hose must be trimmed for installation.
Both versions use the same pump head. Check the end and outside diameter of your hose before ordering.
One Head for Three Valve Types
One port fits Presta and Clik valves, while the other fits Schrader. For Clik valves, turn the orange collar from P to C so the pump gauge can read the tyre pressure.
Key Features
- Leverless push-to-lock fitting with quick-release button
- Compatible with Presta, Schrader and Clik valves
- No internal parts to swap between valve types
- Die-cast alloy body with dual sealing system
- 90° hose exit
- Maximum pressure: 150 PSI / 10.3 bar
- Choice of Schrader Thread or Compression Nut hose fitting
- Compression Nut version includes nut and ferrule
Why Choose the Granite Design Quickie?
The Quickie gives you a quick way to connect your pump without a lever or a threaded valve attachment. It is a useful upgrade if you regularly switch between bikes with different valve types.
Who Is It For?
For riders and home mechanics who want to replace a worn pump head or make their compatible pump easier to use across Presta, Schrader and Clik valves.
Our Thoughts
A good pump head makes checking tyre pressure less of a chore. The push-on fitting is easy to use, and the release button helps remove the head without pulling sideways on the valve.
Take a moment to check your hose first: the Schrader Thread version screws onto a compatible fitting, while the Compression Nut version requires bare rubber hose.
Specifications
- Type: 3-in-1 quick-connect pump head
- Valve compatibility: Presta, Schrader and Clik
- Body: Die-cast alloy
- Hose exit: 90°
- Maximum pressure: 150 PSI / 10.3 bar
- Schrader Thread model: GQK26S
- Compression Nut model: GQK26H
- Compression Nut hose fit: 8–11 mm outside diameter rubber hose
- Compression Nut hardware: Nut and ferrule included
Why Buy from Chain Reaction?
- Help choosing the right fitting for your pump
- Advice on pumps and valve compatibility
- Independent Christchurch bike shop
Visit Chain Reaction Christchurch — over 200 free car parks on-site.
